ABT Go 5.2.1

ABT Go is a mobile application designed for the execution of commissioning and maintenance operations on Siemens devices utilized in building automation and control systems.

• Access to Siemens devices for commissioning and maintenance activities requires security authentication.
• Support is provided for various Siemens devices, such as Desigo room automation DXR1/2.. or PXC3.E.., Desigo automation stations PXC4/5/7.., and Siemens Intelligent Valve EVG/F.
• Software and configuration updates, along with backup/restore functionality, are supported. Online configuration changes are available for DXR1 and EVG/F.
• An expedited overview of all network devices (including name, type, IP address, location, and equipment ID) is provided.
• Easy and intuitive diagnostics can be performed through a consolidated list for all devices or via graphics for the DXR1/2.. or PXC3.E..
• The dashboard offers a swift summary of device commissioning status.
• Monitoring, managing, and reporting the commissioning status of each data point (whether not checked, failed, or passed) is facilitated.
• Capability to add/change the assignment of KNX PL-Link devices for DXR1/2 .. or PXC3.E .. PXC4/5/7 is available.
• Add/change the assignment of DALI 1 and DALI 2 devices for PXC3.E..
• Indicators display manually overridden data points and allow command actions on them.
• Data points in alarm are identifiable with options for reset/acknowledgment for the DXR2.. or PXC3.E.. or PXC4/5/7..
• Inspection and modification of data point parameters and properties (I/O, PL-Link, ModBus, MBus) are supported.
• Online trending aids in data point testing.
• Supports blinds command functionality.
• Enables registration as foreign device discovery.

Requirements include:

• Desigo room automation stations (DXR1/2... or PXC3.E..) from Siemens on Ethernet (BACnet/IP) or MS/TP (BACnet/MSTP).
• Desigo automation stations (PXC4/5..) for primary plants from Siemens on Ethernet (BACnet/IP) or MS/TP (BACnet/MSTP) or an activated device access point (WLAN) with application loaded and network setup finalized.
• Siemens Intelligent Valve on Ethernet (BACnet/IP) or an activated device access point (WLAN).
• The network communication should be established over WLAN (access point/router) to a BACnet/IP network containing the Siemens devices in the same IP subnet (proxy-free), or over a router to a BACnet/MSTP network.
• The power save mode must be disabled for proper functionality.